 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 360W Single Output Battery Charger Features : PB-360 series 3 stage charging AC 115/230VAC selected by switch Built-in passive PFC function compliance to EN61000-3-2 Class A (option) Protection: Overload / Short circuit / Reverse polarity / Over voltage / Over temperature Charger for lead-acid batteries 2 color LED loading indicator Low cost, High reliability FAN on/off control(Depends on charging current) 2 years warranty (except for 48V) (P type only) PB 1.300W without FAN 2.360W with FAN P:With Passive PFC N:Without Passive PFC 300/360 P 12 12:14.4V 24:28.8V 48:57.6V SPECIFICATION MODEL BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE OUTPUT RECOMMENDED BATTERY CAPACITY(AMP HOURS)(Note 5) BATTERY TYPE OUTPUT CURRENT VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) INPUT POWER FACTOR (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD SHORT CIRCUIT PROTECTION REVERSE POLARITY OVER VOLTAGE OVER TEMPERATURE FUNCTION REMOTE CONTROL (CN5) WORKING TEMP. PB-360 14.4V 13.6V -12 PB-360 28.8V 27.2V 26 ~ 28.8V 40 ~ 125Ah -24 PB-360 57.6V 54.4V 52 ~ 58.6V 20 ~ 65Ah -48 VOLTAGE ADJUSTABLE RANGE 13 ~ 14.7V 80 ~ 200Ah Open & Sealed Lead Acid 24.3A 47 ~ 63Hz 85% >0.65 (with P type) at 230VAC 7A/115VAC 3.5A/230VAC COLD START 60A <3.5mA / 240VAC 12.5A 248 ~ 370VDC 6.25A 90 ~ 132VAC / 180 ~ 264VAC selected by switch 86% 87% 90 ~ 110% rated output current Protection type : Constant current limiting, recovers automatically after fault condition is removed O/P Built in fuse (FS100) to protect short circuit condition, shut down o/p voltage and can not re-power on By internal fuse 16 ~ 18V 31 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Automatically derate charge current until zero Open: Normal work Short: Stop Charging -20 ~ +60 (Refer to output load derating curve) 59 ~ 64V 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 45 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes IEC60335-2-29 CB approved by TUV(except for 48V), UL60950-1 approved SAFETY STANDARDS SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC / 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY Compliance to EN61000-3-2,-3 (only P type) Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 115.8Khrs min. MIL-HDBK-217F (25 ) 253*135*48.5mm(L*W*H) 1.5Kg; 6pcs/10Kg/0.95CUFT OTHERS NOTE MTBF DIMENSION PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. File Name:PB-360-SPEC 2008-11-11 360W Single Output Battery Charger Mechanical Specification 253 235 127 5.5 9 .75 54 PB-360 Case No.801A series Unit:mm 12 48.5 -V +V 9.25 ON/OFF SWITCH SVR1 CN5 LED 12 11 Air flow direction Remote Control(CN5) : JST B2B-XH or equivalent Assignment PIN1,2 Open: Normal work PIN1,2 Short: Stop Charging Mating Housing JST XHP or equivalent Terminal JST SXH-001T-P0.6 or equivalent Block Diagram fosc : 70KHz FAN ON/OFF CONTROL EMI FILTER RECTIFIERS & PASSIVE P.F.C. POWER SWITCHING RECTIFIERS & FILTER O.C.P. FG O.L.P. PWM CONTROL DETECTION CIRCUIT O.V.P. POLARITY REVERSE PROTECTION +V -V I/P Charging Curve Output Load VS Temperature Start V boost VFLT 100 90 80 Charge Voltage 100% 70 LOAD (%) Charge Current 60 40 30 Constant Current Constant Voltage stage 1 stage 2 stage 3 LED COLOR Red Green -20 10 20 30 40 50 60 70 AMBIENT TEMPERATURE ( ) State Vboost VFLT PB-360-12 14.4V 13.6V PB-360-24 28.8V 27.2V PB-360-48 57.6V 54.4V File Name:PB-360-SPEC 2008-11-11 135 INLET 230 |
Price & Availability of PB300P-12
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |